Tough Glass Partition Prices in Kenya — The Complete Guide
Tough glass partition prices in Kenya start at KES 11,000 per square metre for 8mm toughened glass and can exceed KES 30,000 per square metre for double-glazed acoustic systems. Glass thickness, finish, frame type, and installation requirements all influence the final price.
This guide covers everything you need to know before spending a shilling on tough glass partitions in Kenya. It gives you the verified current market price from every active Kenya supplier, explains what drives price variation, tells you exactly which thickness suits your specific environment, and shows you how to calculate your total project cost accurately before you pick up the phone.
We are Suimas — Kenya’s #1 interior design and fit-out company, crowned Best Interior Design Company in Nairobi for three consecutive years. We have designed and installed tough glass partitions across all 47 Kenya counties for over 18 years. Every price and recommendation in this guide reflects our real Kenya market experience.
📞 Call or WhatsApp: 0717 044 443 | 0739 255 050
What Is Tough Glass — And Why It Matters for Partitions
Tough glass, toughened glass, and tempered glass are three names for the same product. All three terms describe glass that manufacturers heat-treat to make it approximately four to five times stronger than standard annealed glass of the same thickness.
Furthermore, the defining safety characteristic of toughened glass is how it breaks. When standard glass fractures, it produces long, sharp shards that cause severe lacerations. When toughened glass fractures under extreme impact, it shatters into small, blunt granular pieces — significantly reducing the risk of injury.
Why toughened glass is mandatory for partitions in commercial buildings:
Kenya’s commercial building code requires safety glass for any glazed partition or internal screen in an occupied building. Standard annealed glass is not compliant for partition use. Every legitimate Kenya glass partition installation uses toughened safety glass — and you should verify this before accepting any partition quotation.
What makes toughened glass different from standard glass:
| Property | Standard Glass | Toughened Glass |
|---|---|---|
| Strength | Baseline | 4–5× stronger |
| Break pattern | Dangerous sharp shards | Small blunt granules |
| Heat resistance | Low | High |
| Commercial building compliance | ❌ Not compliant | ✅ Required by code |
| Can be cut after manufacture | ✅ Yes | ❌ No |
That last point is critical — and no competitor article makes it clear enough.
Once manufacturers temper toughened glass, you cannot cut, drill, or modify the glass. Therefore, provide the exact final dimensions before the manufacturer starts production. Measure accurately, confirm the dimensions, and place your order once.
Tough Glass Partition Prices in Kenya — All Active Suppliers Compared
The following prices are drawn from every active Kenya tough glass partition supplier with publicly published pricing.
Tabasamu Spaces — located at Benjoe House, Tsavo Road, Nairobi — lists toughened glass partitions at KES 11,000 per m² for 8mm and KES 13,000 per m² for 10mm, sold per square metre for accurate measurement and professional installation.
Cosmic Choices — also located at Benjoe House, Tsavo Road, Nairobi — lists toughened glass partitions at the same pricing of KES 11,000–13,000/m² for 8mm and 10mm. The identical address and pricing strongly indicate a shared supplier network between Tabasamu Spaces and Cosmic Choices.
Suimas (interiordesigners.co.ke) — frameless 10mm toughened glass partition installed at KES 13,500/m², including aluminium floor channel, ceiling track, all stainless steel fixings, transport within Nairobi, and a 1-year workmanship warranty.
Complete current market price comparison:
| Supplier | 8mm | 10mm | 12mm | Includes Install? |
|---|---|---|---|---|
| Tabasamu Spaces | KES 11,000/m² | KES 13,000/m² | Not listed | Unclear |
| Cosmic Choices | KES 11,000/m² | KES 13,000/m² | Not listed | Unclear |
| Suimas (interiordesigners.co.ke) | KES 11,000/m² | KES 13,500/m² | KES 15,000–18,000/m² | ✅ Yes — fully installed |
The supply-only vs installed distinction is the most important price comparison factor. See the next section.
Supply Only vs Supply and Install — The Critical Difference
When comparing tough glass partition prices in Kenya, the most important question to ask any supplier is: does this price include professional installation?
A supply-only price, however, covers only the glass panels. Therefore, you must budget separately for floor channels, ceiling tracks, stainless steel fixings, installation labour, and project management. In addition, you may need to pay separately for other installation-related services.
On the other hand, a supply-and-install price covers the materials and services needed to complete the glass partition. For this option, the supplier provides the glass panels together with all necessary hardware, including floor channels, ceiling tracks, patch fittings or point fixings, and handles. Furthermore, the installation team handles the fitting and site cleanup, giving you a complete, ready-to-use partition.
What is not included in glass supply-only pricing:
| Item | Typical Cost |
|---|---|
| Floor channel (aluminium, powder-coated) | KES 800 – 1,500 per linear metre |
| Ceiling track | KES 600 – 1,200 per linear metre |
| Patch fittings (per panel) | KES 2,500 – 5,000 per set |
| Point fixings / glass clamps | KES 1,500 – 3,500 each |
| Installation labour | KES 3,000 – 6,000 per m² |
| Transport to site | KES 5,000 – 20,000 depending on location |
Worked example — the real cost of a “KES 11,000/m²” supply-only partition:
A 27m² glass partition (10m long × 2.7m ceiling) at KES 11,000/m² supply-only:
- Glass panels: 27m² × KES 11,000 = KES 297,000
- Floor channel (10 linear metres): KES 12,000
- Ceiling track (10 linear metres): KES 10,000
- Patch fittings (9 panels): KES 36,000
- Installation labour: 27m² × KES 4,500 = KES 121,500
- Transport: KES 12,000
- Total actual cost: KES 488,500 — vs the KES 297,000 the supply-only price implied
The Suimas supply-and-install price for the same partition:
27m² × KES 13,500/m² = KES 364,500 — fully installed, all hardware included, 1-year warranty.
The Suimas fully installed price is KES 124,000 less than the hidden total cost of a supply-only purchase — because our pricing includes everything.
💡 Always ask: “Does this price include installation, all hardware, and transport to site — or is it glass panels only?” If the answer is unclear, add 40–60% to the quoted price to estimate total project cost.
Glass Thickness Guide — 8mm vs 10mm vs 12mm
Toughened glass partition panels are available in Kenya in 8mm, 10mm, and 12mm thicknesses. Each delivers measurably different performance, and the correct choice depends on your panel dimensions, your traffic environment, and your acoustic requirements.
8mm Toughened Glass — KES 11,000/m²
8mm is the entry-level specification for Kenya tough glass partitions. It is the thickness stocked by both Tabasamu Spaces and Cosmic Choices at KES 11,000/m².
8mm delivers:
- Toughened safety glass compliance — four to five times stronger than standard glass
- Clean, transparent appearance
- Acoustic performance: Rw 28–32dB — moderate speech privacy
- Maximum panel width without intermediate support: approximately 1.2m
- Maximum panel height: approximately 3.0m
8mm is the right choice when:
- Panel widths are below 1.2 metres
- The environment has light traffic
- Cost efficiency is the primary priority
- The partition is for a home, small office, or light commercial environment
8mm is not the right choice when:
- Panels are wider than 1.2 metres — perceptible flex will occur
- High acoustic privacy is required
- Heavy traffic or frequent physical contact with the glass is expected
- A premium, substantial visual impression is the brief
10mm Toughened Glass — KES 13,000–13,500/m²
10mm is the standard premium specification for Kenya office and commercial tough glass partitions. Tabasamu Spaces lists it at KES 13,000/m². Suimas installs it fully at KES 13,500/m² including all hardware and warranty.
10mm delivers:
- Significantly greater rigidity and panel stiffness than 8mm
- Acoustic performance: Rw 32–35dB —Thus sufficient for standard office speech privacy
- Maximum panel width without intermediate support: approximately 1.5m
- Maximum panel height: approximately 3.5m
- A noticeably more substantial, premium feel underhand and visually
10mm is the right choice when:
- Panel widths are between 1.2m and 1.5m
- The environment is a professional office with moderate traffic
- A premium visual impression is part of the brief
- The partition is for boardrooms, executive offices, or client-facing areas
10mm is the Suimas default specification for every Kenya commercial glass partition unless a specific application requires otherwise.
12mm Toughened Glass — KES 15,000–18,000/m²
12mm is the luxury specification — the thickest single-glazed toughened glass panel available for partition applications in Kenya.
12mm delivers:
- Maximum rigidity — virtually no panel flex regardless of width
- Best single-glazed acoustic performance: Rw 35–38dB
- Maximum panel width without intermediate support: approximately 2.0m
- Available in standard clear and low-iron ultra-clear (no green edge tint)
- The most prestigious visual weight of any single-glazed glass partition
12mm low-iron ultra-clear glass:
Standard clear toughened glass has a slight green tint on the panel edge — visible at close range, particularly on thicker panels. Low-iron glass eliminates this tint completely, producing a glass that is perfectly transparent at every edge and across every surface. It costs KES 16,500–18,000/m² installed.
12mm is the right choice when:
- Maximum single-glazed visual quality is the primary brief
- Wide panels (above 1.5m) are required
- The installation is a luxury CEO suite, premium showroom, or high-end residential
- The absolute best available single-glazed glass is specified
Acoustic Performance — What Each Thickness Delivers
Acoustic performance is hence most commonly misunderstood aspect of tough glass partition specification in Kenya. Understanding what each glass thickness actually delivers prevents the expensive mistake of installing a glass boardroom that provides insufficient privacy.
Acoustic performance of tough glass by thickness:
| Glass Specification | Acoustic Rating | Practical Meaning |
|---|---|---|
| 8mm single-glazed | Rw 28–32dB | Raised voices clearly audible through partition |
| 10mm single-glazed | Rw 32–35dB | Normal conversation partially audible |
| 12mm single-glazed | Rw 35–38dB | Normal conversation significantly reduced |
| Double-glazed (6+6mm, 50mm gap) | Rw 36–42dB | Normal conversation barely audible |
| Double-glazed (8+8mm, 100mm gap) | Rw 40–45dB | Near-complete speech privacy |
What these numbers mean in your Kenya office:
Rw 32dB (10mm glass) means a normal-volume conversation in a glass-walled meeting room is partially audible in the adjacent open-plan area — enough for colleagues to hear that a meeting is happening, but not clearly enough to follow the content.
Rw 38dB (12mm glass or double-glazed 6+6mm) means the same conversation is significantly reduced — quiet speech is not audible, and normal speech is very faint.
Rw 42dB (double-glazed 8+8mm) means the meeting room delivers near-complete speech privacy — equivalent to a well-constructed gypsum partition.
The right acoustic specification by application:
| Application | Minimum Required | Recommended |
|---|---|---|
| Open-plan office subdivision | Rw 28–32dB | 8mm or 10mm |
| Standard meeting room | Rw 32–35dB | 10mm |
| Client consultation room | Rw 35–38dB | 12mm |
| Legal / financial boardroom | Rw 38–42dB | Double-glazed 6+6mm |
| Medical consultation room | Rw 40–45dB | Double-glazed 8+8mm |
Double-glazed acoustic glass partition prices:
| System | Acoustic Rating | Price Per m² |
|---|---|---|
| Double-glazed 6+6mm (50mm gap) | Rw 36–42dB | KES 18,000 – 24,000 |
| Double-glazed 8+8mm (100mm gap) | Rw 40–45dB | KES 22,000 – 30,000 |
Glass Finish Options — Clear, Frosted, Tinted, Smart
Every tough glass partition available from Kenya suppliers is offered in clear glass as the standard specification. Tabasamu Spaces and Cosmic Choices both list only clear glass at their published prices. Suimas offers the full range of finish options.
Glass finish options and their price premium:
| Finish | Effect | Additional Cost Per m² |
|---|---|---|
| Clear toughened | Full transparency — maximum light | Baseline |
| Frosted toughened (manufactured) | Visual privacy, diffused light | +KES 1,500 – 2,500 |
| Manifestation film (applied) | Partial privacy, branding, safety | +KES 500 – 1,200 |
| Tinted — grey, bronze, blue | Glare reduction, partial privacy | +KES 1,500 – 3,000 |
| Smart / switchable | Instantly clear or frosted on demand | KES 22,000 – 45,000 total |
Which finish for which application:
Clear glass is the standard specification for open-plan office subdivisions, executive suite perimeters, and also showrooms where visual openness is the brief. It delivers maximum light penetration and the most prestigious visual impression.
Frosted glass is the correct specification for HR offices, client consultation rooms, and thus any glass partition where visual privacy is required without sacrificing the light-transmitting advantage of glass over gypsum. The frosting process is applied during manufacturing — it is permanent and cannot be removed.
Manifestation film is applied to existing clear glass after installation. It creates a partially frosted pattern — dots, stripes, or branded graphics — at a significantly lower cost than pre-manufactured frosted glass. It can be changed or removed if branding evolves.
Smart glass switches between transparent and frosted in under one second via an electric current — controlled by a wall switch, remote, or app. It eliminates the need for blinds or curtains in any partition where instant privacy is occasionally required. It is specified for premium CEO suites, luxury hotel meeting rooms, and high-end residential applications.
Framed vs Frameless Tough Glass — Which Is Right for You
The frame system that holds your glass panels is as important as the glass specification — and it significantly affects both cost and visual outcome.
Frameless tough glass partitions hold panels in a flush floor channel (typically 40–50mm wide) and a ceiling track, with panel-to-panel connections made via stainless steel point fixings or glass clamps hence No visible aluminium profile between panels. The glass is the dominant visual element.
Aluminium-framed glass partitions use an extruded powder-coated aluminium profile — 50mm to 150mm wide — so as to hold the glass panels. Frame available in white, black, grey, champagne, or custom RAL colours.
Framed vs frameless comparison:
| Factor | Frameless | Aluminium-Framed |
|---|---|---|
| Visual impression | Maximum prestige | Modern professional |
| Cost | KES 11,000–18,000/m² | KES 9,500–13,000/m² |
| Brand colour integration | ❌ Not possible | ✅ Custom RAL frame colour |
| Ability to mix glass + solid panels | Limited | ✅ Easy with MDF or gypsum infill |
| Suitable for wider panels | Yes — point fixings at any width | Yes — frame provides support |
| Best for | CEO suites, boardrooms, prestige reception | Mixed offices, branded environments |
View our glass and aluminium partition service →
Glass Partition Door Prices in Kenya
Glass partition doors are quoted separately from the partition panels — and they are the most commonly underestimated cost in any Kenya tough glass partition project.
Glass partition door price guide:
| Door Type | Price Each (Supply + Install) |
|---|---|
| Frameless glass door — patch fittings (hinged) | KES 40,000 – 55,000 |
| Frameless glass door — floor spring (heavy use) | KES 55,000 – 75,000 |
| Frameless glass sliding door — single panel | KES 45,000 – 65,000 |
| Frameless glass sliding door — double panel | KES 65,000 – 95,000 |
| Aluminium-framed glass door — hinged | KES 25,000 – 42,000 |
| Aluminium-framed glass door — sliding | KES 30,000 – 50,000 |
| Glass door with frosted film | +KES 3,000 – 8,000 |
| Glass door with digital lock | +KES 8,000 – 25,000 |
The most common budgeting error: A project with four glass partition doors — two frameless hinged, one frameless sliding, one framed — adds KES 165,000–265,000 to a partition budget that did not properly account for door costs. Count your doors and specify their type before finalising any project budget.
How to Calculate Your Tough Glass Partition Cost in Kenya
Tough glass partitions are priced per square metre of face area — not floor area.
Face area = partition length (metres) × ceiling height (metres)
Step-by-step calculation:
1 — First, measure your partition run. Walk along the planned partition line and measure its total length in metres.
2 — Next, measure your ceiling height. Measure from the finished floor to the underside of the ceiling. Typically, most Nairobi commercial offices have ceiling heights between 2.4m and 3.0m.
3 — Then, calculate the face area. Multiply the partition length by the ceiling height to determine the total area in square metres.
4 — After that, choose your glass specification. Select the appropriate glass type and thickness based on your project requirements, then refer to the price table above.
5 — Once you have the area, calculate the partition cost. Multiply the total face area by the applicable price per m².
6 — Finally, add door costs separately. Count each door opening and use the relevant door price from the table above to calculate the additional cost.
As a result, you can estimate the basic cost of your glass partition project before requesting a detailed quotation.
Quick ceiling height cost multiplier:
| Ceiling Height | Face Area vs 2.7m Standard |
|---|---|
| 2.4m | 11% less |
| 2.7m | Baseline |
| 3.0m | 11% more |
| 3.5m | 30% more |
| 4.0m | 48% more |
Example calculation:
A boardroom partition 12 metres long at 2.7m ceiling height in a Kilimani office:
- Face area: 12m × 2.7m = 32.4m²
- Glass specification: 10mm frameless clear at KES 13,500/m²
- Partition cost: 32.4 × KES 13,500 = KES 437,400
- 1 frameless glass door (floor spring): KES 65,000
- Total: KES 502,400
Skip the maths entirely: WhatsApp photos of your space + dimensions to 0717 044 443. Receive a preliminary estimate within one hour and a full 3D layout with itemized quotation within 24 hours of your free site visit.
Complete Worked Examples — Tough Glass Partition Projects in Kenya
Example 1 — Small Office Suite, Westlands (8mm, 2 rooms)
Brief: Digital agency creating two glass meeting rooms in a 60m² Westlands office.
| Element | Spec | Face Area | Rate | Cost |
|---|---|---|---|---|
| Meeting room A (7m × 2.7m = 18.9m²) | 10mm clear frameless | 18.9m² | KES 13,500 | KES 255,150 |
| Meeting room B (6m × 2.7m = 16.2m²) | 10mm clear frameless | 16.2m² | KES 13,500 | KES 218,700 |
| 2 frameless glass doors (patch fittings) | — | — | KES 48,000 each | KES 96,000 |
| Total | KES 569,850 |
Example 2 — Corporate Boardroom, Upperhill (12mm low-iron)
Brief: Financial services firm building a premium boardroom requiring acoustic privacy.
| Element | Spec | Face Area | Rate | Cost |
|---|---|---|---|---|
| Boardroom walls (16m × 2.7m = 43.2m²) | Double-glazed 6+6mm acoustic | 43.2m² | KES 22,000 | KES 950,400 |
| Manifestation film (branding + safety marks) | Full height | 43.2m² | KES 800 | KES 34,560 |
| 1 frameless glass door (floor spring, heavy duty) | — | — | — | KES 70,000 |
| Total | KES 1,054,960 |
Example 3 — Open-Plan Office, Kilimani (10mm, full floor)
Brief: 25-person tech company fitting out a 200m² Kilimani floor with frameless glass throughout — CEO suite, 3 meeting rooms, reception separation, and HR office (frosted).
| Element | Spec | Face Area | Rate | Cost |
|---|---|---|---|---|
| CEO suite (14m × 2.7m = 37.8m²) | 12mm low-iron frameless | 37.8m² | KES 17,000 | KES 642,600 |
| 3 meeting rooms (28m × 2.7m = 75.6m²) | 10mm clear frameless | 75.6m² | KES 13,500 | KES 1,020,600 |
| Reception (6m × 2.7m = 16.2m²) | 10mm clear frameless | 16.2m² | KES 13,500 | KES 218,700 |
| HR office (8m × 2.7m = 21.6m²) | 10mm frosted frameless | 21.6m² | KES 15,500 | KES 334,800 |
| 7 glass doors (mixed spec) | blended KES 52,000 | — | — | KES 364,000 |
| Total | KES 2,580,700 |
Example 4 — Home Office Glass Wall, Lavington (residential)
Brief: Homeowner creating a glass-walled home office from a living room corner.
| Element | Spec | Face Area | Rate | Cost |
|---|---|---|---|---|
| Home office walls (9m × 2.4m = 21.6m²) | 8mm clear frameless | 21.6m² | KES 11,000 | KES 237,600 |
| Manifestation dots (privacy + safety) | — | 21.6m² | KES 700 | KES 15,120 |
| 1 frameless glass door (patch fittings) | — | — | — | KES 48,000 |
| Total | KES 300,720 |
Where Tough Glass Partitions Work Best
Tough glass partitions are often the right choice for environments where natural light distribution, visual openness, and a premium aesthetic are priorities. However, they may not suit environments that require complete visual privacy or maximum acoustic isolation.
Office and commercial environments:
In particular, glass partitions remain one of the most common choices in Kenya’s commercial spaces. For example, they allow natural light from perimeter windows to reach the full depth of large office floor plates. As a result, they can reduce the dark, enclosed feel often associated with older gypsum-divided interiors in Nairobi commercial buildings. In addition, executive suites, boardrooms, meeting rooms, reception areas, and open-plan subdivisions can all benefit from well-planned glass partitioning.
Home and residential:
Tough glass partitions create attractive room divisions in Kenyan homes and apartments, including home offices, open kitchen areas, bedroom partitions, and en-suite bathroom screens. Most residential applications use 8mm tough glass, which provides sufficient strength and durability.
Hospitality and retail:
Hotels, restaurants, salons, clinics, and retail stores use tough glass partitions to define service zones while keeping spaces visually open. Many commercial spaces in Kenya use a frosted glass screen at counter height with clear glass above.
Space type specification guide:
| Space Type | Recommended Spec | Price Per m² |
|---|---|---|
| CEO suite / executive office | 12mm low-iron frameless | KES 16,500 – 18,000 |
| Corporate boardroom | Double-glazed 6+6mm | KES 18,000 – 24,000 |
| Standard meeting rooms | 10mm clear frameless | KES 13,500 |
| Open-plan office subdivision | 10mm clear frameless | KES 13,500 |
| HR or consultation room | 10mm frosted | KES 15,000 |
| Home office | 8mm clear frameless | KES 11,000 |
| Medical consultation room | Double-glazed 8+8mm | KES 22,000 – 30,000 |
| Salon / spa | 8mm or 10mm clear | KES 11,000 – 13,500 |
| Hotel lobby screen | 10mm or 12mm clear | KES 13,500 – 17,000 |
The Critical Warning — What Happens If You Get Measurement Wrong
This is the most important practical warning in this entire guide — and the warning that no competitor article provides clearly enough.
Toughened glass cannot be cut, drilled, or resized after the tempering process is complete.
Every glass panel must be ordered to its exact final dimensions before manufacture. Once the glass has been tempered, any attempt to cut or drill it will cause the entire panel to shatter into granules — the same way it would under extreme impact in use.
The practical consequences for Kenya glass partition projects:
If your installer orders glass to the wrong size — because they measured incorrectly, because the ceiling height was not confirmed, or because a structural column was not accounted for — the incorrectly sized glass cannot be used. New panels must be ordered from scratch, adding 10–21 days lead time and 100% of the material cost for the affected panels.
How Suimas prevents measurement errors:
Every Suimas glass partition project begins with a professional site measurement by a trained fitter — not an estimate from a floor plan. We measure every dimension twice, confirm the exact ceiling height at every point along the partition run, identify structural obstructions, and check for floor levelness before any glass is ordered.
Furthermore, our 3D design visualization allows you to see every panel in its exact position before any glass is manufactured — providing a final visual check against the site conditions. View our 3D visualization service →
Hidden Costs to Budget For
VAT at 16%: Confirm whether any quote is VAT-inclusive or exclusive. On a KES 600,000 project, VAT adds KES 96,000.
Structural assessment: If your ceiling is a suspended gypsum ceiling rather than a concrete soffit, the ceiling track must be fixed to the concrete above — which may require ceiling opening and specialist fixing. Budget KES 15,000–40,000 for structural ceiling assessment and specialist fixings.
MEP relocation: Glass partition runs that cross beneath existing sprinkler heads or light fittings require MEP relocation. Contractors typically charge KES 8,000–25,000 per service point they move.
Building management fees: Most Nairobi commercial buildings charge fees for goods lift access, floor protection, and waste disposal during fit-out works. Building management typically charges KES 20,000–80,000, depending on the building.
Regional mobilisation: Projects outside Nairobi attract a KES 50,000 mobilisation fee to cover transport, logistics, and setup in Mombasa, Kisumu, Nakuru, Eldoret, Thika, Machakos, Nyeri, and other regions across Kenya.
Contingency (10–15%): Always set aside a 10–15% contingency for a glass partition project. Unforeseen structural conditions, transport-related material damage, and measurement corrections can increase the final installation cost.
Why Choose Suimas for Tough Glass Partitions in Kenya
Suimas delivers tough glass partitions as part of a complete office or interior design service — not as a standalone product supply. When you engage Suimas, you receive everything that product listing competitors cannot provide.
✅ Kenya’s #1 rated interior design company — three consecutive years
✅ 18+ years of Kenya glass partition installation experience
✅ Professional site measurement — every dimension confirmed before any glass is ordered
✅ Photorealistic 3D layout — see your partitioned space before work begins
✅ All glass types — 8mm, 10mm, 12mm, low-iron, frosted, tinted, smart, double-glazed
✅ Frameless and framed systems — both available in every specification
✅ Supply and install — complete price including all hardware, tracks, and fixings
✅ Transport within Nairobi — included in all prices
✅ 1-year workmanship warranty — all installations guaranteed
✅ Complete office coordination — ceiling, flooring, and partition designed simultaneously
✅ All 47 counties served — KES 50,000 mobilisation for regional projects
✅ Free site visit — anywhere in Kenya, zero obligation
View our glass and aluminium partition service →
View our complete office interior service →
📞 Get Your Free Tough Glass Partition Quote Today
Three ways to start:
Option 1 — WhatsApp your space photos and dimensions
Send to 0717 044 443. Preliminary estimate within 1 hour. Full 3D layout + itemized quotation within 24 hours of your free site visit.
Option 2 — Call us now
Tell us your partition run length, ceiling height, and glass specification preference. We give you an accurate cost estimate immediately.
Option 3 — Book a free site visit
We come to your office, home, or commercial space anywhere in Kenya. Free professional measurement, free 3D design, free itemized quotation. Zero charge. Zero obligation.
📞 0717 044 443 | 0739 255 050
📧 info@interiordesigners.co.ke | info@suimas.co.ke
📍 Nairobi CBD
🌐 interiordesigners.co.ke | suimas.co.ke
WhatsApp “GLASS” + your space photos to 0717 044 443 for Kenya’s most competitive tough glass partition prices — with free 3D design included.
👉 Book Your FREE Tough Glass Partition Consultation Today
Nairobi Areas We Serve
Westlands, Upperhill, Kilimani, Lavington, Karen, Parklands, Hurlingham, Riverside, Milimani, Gigiri, Runda, Eastleigh, Industrial Area, South B, South C, Thika Road, Ngong Road, Mombasa Road, and the entire Nairobi CBD.
Tough Glass Partition Services Across All 47 Counties
We deliver tough glass partition installation services throughout all 47 counties in Kenya: Mombasa, Kwale, Kilifi, Tana River, Lamu, Taita-Taveta, Garissa, Wajir, Mandera, Marsabit, Isiolo, Meru, Tharaka-Nithi, Embu, Kitui, Machakos, Makueni, Nyandarua, Nyeri, Kirinyaga, Murang’a, Kiambu, Turkana, West Pokot, Samburu, Trans Nzoia, Uasin Gishu, Elgeyo-Marakwet, Nandi, Baringo, Laikipia, Nakuru, Narok, Kajiado, Kericho, Bomet, Kakamega, Vihiga, Bungoma, Busia, Siaya, Kisumu, Homa Bay, Migori, Kisii, Nyamira, and Nairobi.
Frequently Asked Questions
What are tough glass partition prices in Kenya?
Tough glass partition prices in Kenya are KES 11,000/m² for 8mm toughened glass and KES 13,000/m² for 10mm, as listed by Tabasamu Spaces and Cosmic Choices. Suimas installs frameless 10mm at KES 13,500/m² fully installed including all hardware, tracks, and a 1-year warranty. Double-glazed acoustic systems cost KES 18,000–30,000/m². All prices are per square metre of face area (length × height).
What is the difference between 8mm and 10mm tough glass partitions?
10mm glass is 25% thicker, significantly more rigid, and delivers better acoustic performance (Rw 32–35dB vs 28–32dB for 8mm). 10mm supports wider panels without perceptible flex — up to approximately 1.5m wide versus 1.2m for 8mm. Tabasamu Spaces and Cosmic Choices price 8mm at KES 11,000/m² and 10mm at KES 13,000/m². Suimas recommends 10mm as the standard specification for thus any professional office environment.
Do Tabasamu Spaces and Cosmic Choices sell supply only or supply and install?
Both Tabasamu Spaces and Cosmic Choices are listed as retail product suppliers — their published prices of KES 11,000–13,000/m² appear to cover glass panels only. You must add floor channels, ceiling tracks, point fixings, installation labour, and transport to calculate your actual total project cost, which typically adds 40–60% to the supply-only price. Suimas’s price of KES 13,500/m² covers complete supply and professional installation including all hardware.
Can tough glass be cut or resized after installation?
No. Toughened glass cannot be cut, drilled, or modified after the tempering process. Every panel must be ordered to its exact final dimensions before manufacture begins. This makes accurate professional site measurement essential before placing any glass order.
How do I calculate tough glass partition cost in Kenya?y
Measure partition length (m) × ceiling height (m) = face area (m²). Multiply by price per m² for your chosen glass. Add door costs separately. Example: 10m partition at 2.7m ceiling = 27m² × KES 13,500 = KES 364,500 for partitions, plus KES 55,000–75,000 per frameless glass door.
Does Suimas install tough glass partitions outside Nairobi?
Yes — Suimas installs tough glass partitions across all 47 Kenya counties. Regional projects outside Nairobi incur a KES 50,000 mobilisation fee covering Mombasa, Kisumu, Nakuru, Eldoret, Thika, Machakos, Nyeri, and also all other regional centres.
